CS215 Temp/RH Sensor with SDI-12 output

The CS215 is temperature and relative humidity sensor supplied by Campbell Scientific Ltd.
This probe uses a Swiss-made digital humidity and temperature element that provides good measurement accuracy and stability. The elements are based on CMOSens technology, which have been tested for more than two years in Alpine conditions where they were shown to work to their specifications in extreme weather.

One major benefit of the CS215 is the ability to change the sensor element in the field. Each sensor element is individually calibrated so no further adjustment of the probe is required; simply changing the element returns the probe to factory calibration state for both temperature and humidity, allowing low-cost field recalibration without lengthy interruptions to data collection.


  • Uses a combined digital humidity and temperature element
  • Field changeable element allows on-site recalibration
  • Digital SDI-12 output - only requires one datalogger input for both readings
  • Simple datalogger programming
  • Low power consumption
  • Radiation shield recommended when exposed to sunlight


  • Relative Humidity
    • Measurement Range: 0 to 100% RH (-20° to +60°C)
    • Accuracy (at 25°C): ±2% (10-90% range), ±4% (0-100% range)

  • Temperature
    • Measurement Range: -40C° to +70°C
    • Accuracy: ±0.4°C (+5° to +40°C), ±0.9°C (-40°C to +70°C)

  • General
    • Weight: 5.3 oz (w/10 ft cable); 150 g (w/3 m cable)
    • Diameter: 0.5" (1.2 cm) at sensor tip, 0.7" (1.8 cm) at cable end

Request information about this product

What would you like to know?
Prices/Costs   How to Buy   Any other questions/comments:
Your Name:

Your Email Address: Required

(Note. This is only be used for a reply)
Your Phone Number: Required
Your Location/City: Required
Your Country: Required

We will get back to you as soon as possible.

CS215 Brochure

File Size 148KB   Filename b_cs215.pdf   Download